Lynx Roofing installs and replaces Stone Oak metal roofing. We’re a family-owned company rooted in our local community, working on residential roofs. Each project opens with a roof deck inspection, then a written scope listing your panel profile, finish, and sequence. We photograph the work from ridge to trim so the finished roof matches our quote.
Metal Roofing In Stone Oak
Standing Seam And Exposed-Fastener Panels Fitted To Your RooflineA Written Scope Names Your Profile, Color, And Work Order So You Approve The Plan Before The Crew Starts
A metal roof is one of the longest surfaces you’ll ever put over a home, so metal roofing in Stone Oak is worth getting right the first time. Homeowners here favor metal for the way it bounces off our hard summer sun and holds firm through Hill Country storms.
The choice comes down to two things – the system that fits your roofline and the crew that installs it. Lynx Roofing reads your deck before we talk numbers, so the estimate reflects your actual roof.
Then we lay out your options in plain words and put the whole plan in writing. You know the panel profile, the color, and the order of work before we lift the first sheet.
How Lynx Roofing Puts On A Metal Roof In Stone Oak
A metal roof earns its long life from the layers under the surface and how tightly each panel locks. Here’s the order we follow on every home.
Reading The Deck First
We strip the old roof surface and study the bare deck for soft wood, rot, and past water stains.
This step tells us the real condition before we commit to a price. Catching a weak spot now means the new panels sit on solid wood, not a problem waiting to spread. It also keeps your estimate honest, because we quote what the roof actually needs.
Laying High-Temperature Underlayment
Once the deck passes, we roll a high-temperature underlayment across the whole surface. Metal builds real heat under the Texas sun, so this layer is rated for it.
The underlayment adds a second barrier against water and can handle the temperatures a metal roof reaches. Skipping this grade of material is how roofs fail early, so we don’t cut it.
Fitting Flashing At The Weak Points
We set fresh flashing at valleys, vents, chimneys, and along every roof edge, then seal each joint. These transitions are where water tries hardest to sneak in. New, properly sealed flashing keeps those points tight for the life of the panels. Old or reused flashing is a common leak source, so we replace it as part of the job.
Setting And Locking The Panels
We run each panel straight and fasten it to the standard for your system, standing seam or exposed fastener. Proper alignment and fastening let a metal roof shrug off strong gusts. A panel set to spec stays put through heavy rain and wind. When the last one is down, we walk the whole roof to confirm it’s sealed and clean.
Choosing The Metal Roof In Stone Oak That Fits Your Home
Metal roofing brings a few real decisions, and each one shapes how your roof looks and performs. We walk you through them in plain terms.
Standing Seam Vs Exposed Fastener
Standing seam hides its fasteners under raised, interlocking ribs, giving a clean line and fewer openings for water. Exposed-fastener systems show the screws and usually cost less up front. We install both and meet each standard. We’ll help you weigh the look, the budget, and the maintenance on your roofline.
Picking Your Finish And Color
Color does more than set the look on a metal roof. Lighter finishes reflect more of the sun’s heat, which matters through our long summers. Darker tones read differently against brick and stone. We show you finish samples so the color works with your home and your energy goals, not just a swatch on paper.
New Metal Roof Or A Replacement
Lynx Roofing handles both. We set new metal roofs and replace existing ones on residential homes. If your current roof is aging or storm-worn, the deck inspection tells us whether it’s a replacement or a fresh install over new work. Either way, you get the same written scope and photo record from start to finish.
Why Homeowners Count On Lynx Roofing For Metal Roofing In Stone Oak
A metal roof in Bexar County, TX stays on your home for decades, so the company you choose should be easy to size up. Here’s who we are.
- Family Owned.We’re a family-owned company that works on residential roofs. That local footing means we know how homes take the summer sun and Hill Country storms, and we’re nearby when you need us.
- The Inspection Comes Before The Price. We pull back the current surface and read the deck before we quote a dollar. Your metal roofing estimate reflects your actual roof, not a guess from the driveway. It’s how we keep the number you approve the number you pay.
- The Full Plan In Writing. Before the first panel goes up, you see your panel profile, finish, and the order of work spelled out in writing. Nothing about your metal roof is left to memory or verbal promise. You approve the scope, then we build to it.
- Photos From Ridge To Trim. We document the job with photos start to finish, from deck prep to the final walkthrough. You see the underlayment, the flashing, and the panels going on. That record shows exactly what went into your metal roof, even the layers you’ll never see again.
- Residential Roofing Is Our Focus. We concentrate on residential roofs, so a metal roof install on a Stone Oak home is squarely in our lane. That focus shows in how we match a system to your house and finish the work clean.
What Homeowners Say About Lynx Roofing
Homeowners across our service area have told us what it’s like to work with Lynx Roofing on their roofs. Their words say more about the estimate, the crew, and the finished result than we can.
He’s fair and honest….
Extremely knowledgeable regarding roofs, gutters, specifically tiles. He helped choose the colored tile that modernized our home and garage. And garden house Where my son lives. Chris is very friendly and very honest. His Knowledge of roof is impeccable. I would recommend him to anyone who needs a new roof. He’s fair and honest.
I made the correct decision to go with Lynx Roofing
Thank you, Lynx Roofing!…
Lynx Roofing did a great job installing a new roof on my house. I decided to go with them over competitors because they use better materials and installation processes than others. They installed high-quality shingles, removed all prior materials other roofers had previously left in place, and protected the new materials and my house during the installation. They did a great job cleaning up, and my roof looks a lot better now, and has improved durability and ventilation. And installation only took one day. Really appreciate Emmitt’s help and thoroughness; he is very personable and knowledgeable, and everything we discussed regarding materials and installation was completely accurate. Also really appreciate Jonathan’s work on installation day, he communicated with me constantly and sent numerous photos of the work throughout the process. And Cassie has made working through insurance, HOA requirements, and scheduling as easy as possible. Thank you, Lynx Roofing!
Metal Roofing Questions From Stone Oak Homeowners
Clear answers to what we hear most before homeowners commit to a metal roof.
Do you handle both new metal roofs and replacements?
Yes, Lynx Roofing installs new metal roofs and replaces existing ones on residential homes. If you’re replacing an aging or storm-worn roof, the deck inspection tells us the condition underneath and shapes the plan from there.
Do you install metal roofing beyond Stone Oak?
Yes, we install metal roofing throughout the Stone Oak area and across the surrounding Texas Hill Country. We’re based nearby, so most of our service area is a short drive from the shop.
Does a metal roof help with the heat?
Yes, metal reflects a solid share of the sun’s heat, especially in lighter finishes. Through our long summers, that reflected heat keeps some of the load off your attic. Pairing a reflective color with the right underlayment gets you the most out of it.
How much does a metal roof cost in Stone Oak?
Metal roof pricing depends on a handful of drivers, so we quote each home after the inspection. Roof size and pitch, the panel system you choose, the finish, and how complex your roofline is all move the number. We read the deck first, then hand you a written estimate built on your actual roof.
What happens if the deck is bad once you open it up?
We stop and show you the damage before we go further. Deck inspection and any needed repairs are part of the scope, so we address a soft or rotted section before installing the new underlayment and panels. New panels only go over solid wood.
What’s included when Lynx Roofing sets a metal roof?
A metal roof install covers the deck inspection, any needed deck repair, new high-temperature underlayment, fresh flashing, and the panel install. We finish with a full walkthrough of the sealed roof. We put every piece of that scope in writing before we start.
Get Exceptional Roofing For Your Home Or Business
Do you need a roof replacement or repairs for your San Antonio area home or business? Turn to the team that genuinely cares about you and your roof. At Lynx Roofing, we always go the extra mile to ensure your roof is installed the right way so it’s ready for anything.
